







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Westchester, FL: What It Actually Takes
Door installation in Westchester, FL usually runs $650 to $2,600 per door installed, and a typical single exterior door or a run of three interior doors is a one-to-two-day job once the material is on site. Most of what drives that number is what’s behind the trim: on this ZIP 33165 housing stock, a rough opening cut in 1965 rarely matches the door you bought. Call (888) 418-7102 for a free on-site estimate – we measure the opening, not just the door.
How a door install runs, stage by stage
Door Installation is mostly preparation. The hanging takes an afternoon; getting the opening ready to receive a door that closes, seals, and stays square is where the days go. Here’s how we sequence it.
- Stage 1 – Measure and scope (day of estimate, about 45 minutes). We pull the existing trim and check the rough opening against the new door’s specs, confirm wall thickness, and look at the header. On Westchester’s CBS block walls this is where we find out whether the opening is plumb and whether the block needs furring. You decide the door style, material, and swing direction at this stage, because those choices lock the rough-opening spec.
- Stage 2 – Order and permit (5 to 15 business days, varies by door). Exterior door replacements in unincorporated Miami-Dade go through county permitting, and impact-rated doors need product approval documentation on file. We submit, you don’t chase paperwork. Custom or special-order doors take longer than stock.
- Stage 3 – Demo and prep (half a day to a full day). Old door and frame come out, the opening gets squared and shimmed, and any rot or termite damage in the framing gets addressed before anything new goes in. This is the stage that surprises people – we don’t cover damage and hope. If the framing needs work, you get told before we proceed.
- Stage 4 – Set, seal, and trim (one day). Door set, plumb and level, hardware hung, weatherstripping and threshold installed, then foamed and sealed at the perimeter. Interior and exterior trim go back on. You’ll walk the door and check the swing and latch before we leave.
- Stage 5 – Inspection and punch (varies by county schedule). The permit inspection happens, and we handle any correction items. Final walkthrough with you, and the work falls under our 730-Day Done Right Promise – if it’s not right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The door options you’ll be choosing between
Westchester buyers choose from a handful of real categories. Here’s the honest trade-off on each, since the door you pick changes both the price and how the job is built.
- Fiberglass exterior doors. The default for front doors here. Holds up to South Florida sun and humidity without the swelling and warping you get with wood, and it’s impact-rated when specified. Mid-range price, best longevity for the climate.
- Steel exterior doors. Strong and cheaper than fiberglass, but the finish has to be maintained or it rusts, and that matters with salt-laden air near the coast. Good for a service or side door where appearance matters less.
- Solid wood exterior doors. The premium look, and the highest maintenance. In this climate it needs a disciplined finish schedule or it moves and cracks. Suits a homeowner who wants the character and will keep up with it.
- Hollow-core interior doors. Standard for bedrooms and closets. Light, inexpensive, fine for interior use. Don’t put them on an exterior wall or a garage entry.
- Solid-core interior doors. Heavier, quieter, better at blocking sound between rooms. Worth the upgrade on a bathroom or home-office door.
- Impact-rated glazed doors and sidelights. If the door has glass, Miami-Dade hurricane-zone rules mean it needs impact glazing or approved shutters. This adds cost but is often required, not optional, and it’s part of a full Windows & Doors in Westchester scope if you’re doing more than one opening.
Hardware is its own choice – lever versus knob, finish, deadbolt grade – and we carry the major names. Delta and American Standard hardware lines come up often on interior and bath-adjacent doors, and we’ll spec what fits your budget rather than upselling a finish that doesn’t last.
What Door Installation costs in Westchester, FL

Expect $650 to $2,600 per door installed, materials and labor together. A single stock interior door at the low end; an impact-rated fiberglass exterior door with sidelights and upgraded hardware at the high end. Here’s how a line-item estimate breaks down.
| Line item | Typical range |
|---|---|
| Interior door, stock, installed | $650 – $1,100 |
| Interior door, solid-core, installed | $1,000 – $1,700 |
| Exterior fiberglass door, installed | $1,400 – $2,600 |
| Impact-rated exterior door with glass | $1,800 – $2,600+ |
| Framing or rot repair (if found) | $250 – $900 |
| Permit fees (exterior replacements) | pass-through, county-set |
What moves the number to the high end: impact-rated glazing, a special-order or custom size, exterior doors that need the rough opening reworked in block, and multi-door runs where the trim and hardware have to match. What keeps it low: stock sizes that fit the existing opening, interior doors, and a single simple swap. Your written estimate lists each line and the permit cost so there’s no surprise later – the number you see is the number you pay. Omit guesswork: 0% financing for 18 months and $1,000 off projects over $10,000 apply to larger scopes.
See the difference
Before
After
Before
After
Before
AfterWhat Westchester homes specifically do to a door job
Westchester is a built-out, post-WWII unincorporated Miami-Dade suburb, and nearly every door we install here is a replacement on a 1950s-to-1970s single-family lot rather than new construction. That means the door has to fit an opening cut by a builder who wasn’t thinking about impact ratings, and the project runs through Miami-Dade County’s unincorporated permitting and inspection process, not a city hall’s. On the CBS block-and-stucco ranch homes along the blocks near Coral Way and the dense infill around the 33165 core, we regularly find the original steel door frame rusted into the block and the rough opening out of square by a quarter inch – the kind of thing that turns a one-day swap into a two-day job once you’re into the framing. The subtropical climate does the rest: sun and humidity destroy wood doors that aren’t finished right, and hurricane-season wind and rain mean any exterior door with glass needs impact-rated glazing or approved shutters under Florida Building Code high-velocity hurricane zone rules. County inspection is a real step, not a formality, and we handle it.
Serving Westchester, FL – Our Local Coverage Area
We serve Westchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Westchester

A single interior door is a one-day job; an exterior door with impact glazing is typically two days including prep and sealing, plus permit and order lead time before the crew arrives. Custom or special-order doors add 2 to 6 weeks on the front end. Call (888) 418-7102 for a schedule based on your actual door.
Yes for exterior door replacements in unincorporated Miami-Dade – the county requires a permit and inspection, especially when the door is impact-rated. Interior door swaps generally don’t require a permit. We pull the permit and handle the inspection as part of the estimate.
In most cases yes, because we work within the existing rough opening. The exception is a door in a load-bearing wall or a size change that requires reframing the header. We identify that at the estimate stage so there are no change-order surprises mid-job.
Expect $650 to $2,600 per door installed, with interior stock doors at the low end and impact-rated exterior doors with glass at the top. Framing or rot repair, if found, adds $250 to $900. Call (888) 418-7102 for an exact quote – estimates are free.
Every door we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for any workmanship issue within that window. Product warranties ride along with the door manufacturer. We put the guarantee in writing before work starts.
Get a free door estimate in Westchester
Door Installation in Westchester starts with a real measurement, not a phone quote. Call (888) 418-7102 and we’ll set a free on-site estimate – a live person answers around the clock, and on the visit we pull trim, check the rough opening, and hand you a written line-item estimate with the permit cost included. No change orders, no guesswork. From a single bedroom door to a full exterior replacement, we do it right and back it in writing.
Written by the team at Groundwork Construction Co.












