







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Kendale Lakes, FL: What the Job Actually Involves
A paver driveway in Kendale Lakes usually runs $7,000 to $18,000 for a standard two-car apron, and most of these jobs take four to seven working days from demo to the final sweep of polymeric sand. The work is a layered build, not a pour: excavation, compacted base, edge restraint, pavers set on a screeded bed, cuts at the edges, then joint sand and plate compaction. If you want a real number for your lot, call (888) 418-7102 and we’ll walk the property and quote it in writing.
That range holds because almost every driveway we build in Kendale Lakes is replacing something already there. This is a built-out 1970s and 1980s Kendall suburb, so we’re tearing out old concrete or worn pavers, checking what the base did over the last four decades, and rebuilding from the subgrade up.
How We Build a Paver Driveway, Stage by Stage

The sequence matters more than any single material choice. Here’s what a real week looks like.
- Day 1: site walk and layout. We mark the driveway limits with paint, confirm the slope away from the garage slab, and identify where downspouts and swales discharge. You decide the running bond pattern and whether the apron flares at the street. We also confirm HOA documentation and the Miami-Dade permit path before anything gets cut.
- Days 1 – 2: demo and haul-off. Old concrete, asphalt, or failed pavers come out, along with any root-bound or saturated base. On a typical 400 to 600 square foot Kendale Lakes driveway this is one long day plus a morning of hauling. You see bare subgrade by the end of it, which is exactly when hidden problems (soft spots, old utility trenches) show up.
- Day 2 – 3: subgrade and base. We proof-roll the subgrade, then place and compact the aggregate base in lifts, checking grade with a laser as we go. This is the stage that decides whether the driveway stays flat in ten years. It’s also the stage where drainage gets solved: a 1.5 to 2 percent slope to the street or a channel drain if the garage sits low.
- Day 3 – 4: edge restraint and bedding. Rigid edge restraint gets pinned along the sides, then a screeded sand bed goes down. You’ll usually see the layout strings come out here so you can eyeball the lines before a single paver is set.
- Days 4 – 6: setting, cuts, and compaction. Pavers go down, cuts at the edges get made wet, and the whole field gets plate-compacted. Polymeric sand goes into the joints, gets watered in, and sets. Final walkthrough with you, then a written checklist of anything that needs a follow-up visit.
Most jobs land in a single week unless it rains. Summer thunderstorms in South Florida are a real scheduling factor, and we’d rather tell you the driveway will be finished Thursday than pretend rain doesn’t happen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
We carry and install a curated set of hardscape brands, including Belgard, so the decision is about how the driveway looks and holds up, not what happens to be in stock.
- Concrete pavers (interlocking). The default for a reason. Wide color and shape range, individual units can be lifted and reset if something shifts, and the surface stays cooler than poured concrete in full sun. Expect the mid to high end of the $7,000 to $18,000 range depending on size and pattern.
- Clay brick pavers. Warmer color, more texture, and they age with character. They cost more per square foot and take longer to set, so they push a project toward the top of the range. Worth it if the house has brick detailing you want to echo.
- Permeable pavers. Open-graded joints with a stone reservoir underneath. Useful on lots where storm runoff pools at the garage door or the HOA has drainage rules. Higher upfront cost, but it solves a problem rigid pavement can’t.
- Tumbled vs. straight-edged finishes. Tumbled edges look older and more relaxed; straight-edged pavers give crisp modern lines. No price difference to speak of, mostly a design call.
- Pattern and border. A running bond is standard and fastest. A herringbone field with a soldier-course border looks sharper, uses more cuts, and adds labor and material waste. On a small Kendale Lakes driveway, the border is often the cheapest way to make the whole thing look deliberate.
If the driveway is part of a full Driveway & Pavers in Kendale Lakes project that also touches the walkway or a patio apron, tell us at the walkthrough and we’ll quote the whole footprint together so the paver lot and color batch match.
What Paver Driveways Cost in Kendale Lakes, FL

Expect $7,000 to $18,000 for a paver driveway in Kendale Lakes, with the median for a 1970s or 1980s ranch lot landing somewhere in the $10,000 to $13,000 range. Five things push a job toward the low or high end:
- Square footage. The single biggest lever. A double-wide apron at 400 square feet sits low; a long side-run to a rear garage can double the area and the price.
- What’s underneath. A driveway over sound old base is cheaper to rebuild. Undercut base that needs excavation and new aggregate adds both material and hauling.
- Access and demo volume. Narrow side yards, fence gates, and street parking rules in Kendale Lakes affect how efficiently material comes in and debris goes out.
- Paver grade and finish. Concrete pavers at the base level, clay brick or a permeable system toward the top, with pattern complexity layered on top of that.
- Drainage and utility conflicts. A channel drain, re-graded swale, or relocating a downspout all add scope.
Our written estimates include demo, haul-off, base, edge restraint, pavers, cuts, polymeric sand, compaction, and permit fees where a permit is required. What’s typically not included: irrigation line repairs, new driveway gates, and any change to the garage slab itself. The number you see is the number you pay, and every job comes with the 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Kendale Lakes Homes Specifically Do to a Paver Driveway Job
Kendale Lakes is a fully built-out 1970s and 1980s Kendall suburb, which means almost every driveway here is a replacement, not a new build. The housing stock is mostly CBS homes with stucco walls and barrel-tile or shingle roofs, and the driveways that came with them are reaching the age where the original concrete has cracked along the control joints or settled toward the garage.
Two local realities shape the work. First, any change to the driveway footprint, apron, or drainage often needs a Miami-Dade County permit plus HOA approval before the first paver comes out of the wrapper, and the same stucco-and-CBS construction that makes these homes solid is also the reason exterior changes get a closer look during the county’s 40-year recertification cycle. Second, this far inland, the water table sits high after a heavy summer rain, so drainage grading is not optional. We routinely find that the old driveway sloped back toward the garage door, and correcting that means re-cutting the swale to the street and sometimes adding a channel drain at the apron. Homeowners along the Kendall corridors often pair this with Door Installation in Kendale Lakes when the impact upgrade is being done at the same time.
Serving Kendale Lakes, FL – Our Local Coverage Area
We serve Kendale Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Kendale Lakes

Most paver driveways here take four to seven working days, including demo, base, setting, and joint sand. Rain in the summer adds a day or two, and we schedule a start date you can plan around. Call (888) 418-7102 and we’ll estimate your timeline at the site visit.
Often yes, and HOA approval is usually the other half of the paperwork. Any change to the driveway footprint, apron, or drainage run in a built-out Kendale Lakes subdivision typically gets reviewed by Miami-Dade County, and the HOA has its own rules on materials and color. We pull the permits and handle the inspection schedule so nothing stalls the job.
Only when the existing slab is sound, level, and properly drained. Overlay is possible in some cases, but on a 40-year-old Kendale Lakes driveway the base is usually the problem, and paving over a failing base just turns a small repair into a big one. We’ll tell you on-site which route makes sense.
Paver driveway installation typically runs $7,000 to $18,000, with size, base condition, paver grade, pattern, and drainage scope driving the final figure. A written line-item estimate at the walkthrough shows exactly what each part costs. Call (888) 418-7102 for an exact quote – estimates are free.
Every paver driveway we build is backed by the 730-Day Done Right Promise. That covers the workmanship on our installation for two full years; the pavers themselves carry the manufacturer’s own warranty. If something isn’t right, we come back and fix it.
Ready to Price Your Paver Driveway in Kendale Lakes?
Call (888) 418-7102 to schedule a free on-site estimate for paver driveways in Kendale Lakes. A live person answers around the clock, and the visit covers footprint, base condition, drainage, permit path, and paver options so your written quote is a real number. Looking wider, our Driveway & Pavers service covers the full exterior footprint, and you’ll find us across Kendale Lakes and the surrounding neighborhoods. Homeowners planning an interior job at the same time often pair the work with Cabinets & Countertops in Kendale Lakes.
Written by the team at Groundwork Construction Co.












