







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers in Hialeah: What to Know First
We install, repair and replace Belgard paver driveways, patios and walkways in Hialeah as an independent Belgard service provider. On a hardscape project we’re typically looking at multi-day work – most Belgard paver driveways run 3 to 5 days depending on base prep, drainage and whether we’re removing an old concrete slab. Paver driveway installation in Hialeah runs $7,000 to $18,000, and we quote it up front with line items, not a number that drifts once the crew is on site.
This page is for the homeowner who already knows they want Belgard – whether you’re replacing a cracked 1970s slab, refreshing a patio around the pool, or repairing sunken pavers that have already settled. Call Groundwork Construction Co. of Hialeah at (888) 418-7102 for a free estimate. A live person answers, day or night.
How Belgard Products Fail – and How We Fix Them
Belgard makes a genuinely good paver. The failures we see in Hialeah almost never come from the concrete itself – they come from what’s underneath it and how it handles South Florida’s water. Here’s what shows up on our jobs, and what we do about it.
- Sunken or heaving pavers in a Belgard Urbana or Mega-Lafitt driveway. The pavers are usually fine; the base failed. Hialeah’s high water table and heavy summer rain push moisture into a shallow base, and after a few seasons the sand washes out and the surface settles. We check the base depth and drainage first. The fix is a rebuild of the failing section with proper base and compaction, not just re-sanding the joints, which is what a lot of crews do and why it comes back a year later.
- Joint sand washing out after storms. Belgard’s textured lines – Catalina, Fabriqué – rely on polymeric sand locking the joints. In Hialeah’s wet season, flat or reverse-graded driveways dump water across the surface instead of away from it, and the sand erodes from the low side first. We check the slope and re-grade the problem area before we re-sand, so the joint material stays put.
- Efflorescence and cloudy white staining on Belgard stone. That chalky haze is mineral salt migrating out of the concrete, and it’s common in Hialeah’s humidity. Pulling it with the wrong cleaner can etch the surface. We identify whether it’s fresh-install efflorescence or a moisture problem feeding it, treat it correctly, and fix the water source if there is one.
- Cracked or chipped pavers at the driveway apron. Weight mismatch: a lightweight paver at the transition to the street takes constant vehicle load and Hialeah’s sun-hardened subgrade. We replace the failed units with the matching Belgard series and set them on a compacted, reinforced base at the apron so the repair holds.
- Uneven patio edges and settled pool deck pavers. Pool decks around Hialeah sit on fill that moves with the water table, and a Belgard patio can drop 1/2 inch at the edges without any visible crack. We lift, re-set on a rebuilt base, and re-level so pavers sit flush with the coping and the walkway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Belgard Driveway & Pavers Process
Every Belgard job follows the same sequence, whether it’s a small repair or a full driveway.
- 1
Walk the site and look at the water. We check slope, drainage, existing base depth and where Hialeah’s seasonal rain actually goes. This step catches most of the failures we see later.
- 2
Quote it in writing, line by line. The number you see is the number you pay. No change orders halfway through.
- 3
Hold the Belgard series. We match the existing line and color so repaired pavers blend with the install, and we tell you upfront when a series has been discontinued and whether a blend is the honest option.
- 4
Demo and rebuild the base. We remove the failed material, correct the grade, and compact a proper base before any paver goes back down. Half the work on a Belgard repair is underneath it, where you can’t see it.
- 5
Set, cut and sand. Pavers go down to the correct slope, edge restraints go in, and the joints get polymeric sand so they hold through the wet season.
- 6
Walk it with you and back it in writing. We clean up, walk the finished work together, and cover it under our 730-Day Done Right Promise – if it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Belgard Driveway & Pavers Costs in Hialeah

These are the ranges Hialeah homeowners actually see on our estimates. Your exact number depends on base condition and access.
| Scope | Typical range |
|---|---|
| Paver driveway installation (Belgard) | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What moves the price most: failing base you have to rebuild, drainage corrections, and whether we’re removing an old slab first. Our estimate is free, and we quote the whole job up front so there are no surprises once the crew starts. Financing at 0% for 18 months, plus $1,000 off projects over $10,000, keeps a bigger driveway rebuild within reach. Call (888) 418-7102 to schedule your free estimate.
Why Hialeah Homeowners Call Groundwork Construction Co. of Hialeah for Belgard Work
We’ve been in business since 2014, and our technicians have up to 12 years of experience on hardscape and pavers, so Belgard work isn’t new to us. We know the series, we know how South Florida water treats a base, and we know which repairs actually last.
The bigger reason homeowners call us is the accountability. Every project is covered by our 730-Day Done Right Promise – one of the longest workmanship guarantees in the residential space – and we back it with upfront pricing, so the number on the estimate is the number you pay. Live person, 24/7. Background-checked technicians in uniform. One contractor for the driveway, and the rest of the exterior if you need it: we work with Belgard plus brands like KraftMaid, Kohler, GAF and PGT across every trade, so you’re not chasing five different companies. Built to last, backed in writing.
FAQs

Will a Belgard driveway repair be covered by a warranty? Yes – any Belgard paver work we do for you is covered under our 730-Day Done Right Promise, and if it isn’t done right, we make it right. Call (888) 418-7102 for your free estimate.
Can you match my existing Belgard pavers if some are discontinued? Usually – if your Belgard series is still in production we match it exactly; if it’s discontinued, we’ll tell you honestly and offer the closest current series or a blend so the repair looks intentional rather than patched. Call (888) 418-7102 to talk it through.
Should I repair my Belgard paver driveway or replace it? Repair if the base is sound and only a section has failed; replace if the base has repeatedly settled or drains toward the house. We’ll tell you which you have after a site walk – free estimate, and no pressure to replace what doesn’t need it.
How long does a Belgard paver driveway take in Hialeah? Most paver driveways run 3 to 5 days, and repairs of a failing section can often be done in a single visit. Weather during Hialeah’s wet season can add a day for curing and base work.
Do you pull the permits for a Belgard driveway or paver project in Hialeah? Where a permit is required we pull it and make sure the work passes inspection. Local code and driveway standards vary, and we’ll walk you through what your project needs. Call (888) 418-7102 to start your free estimate.
Written by the team at Groundwork Construction Co. of Hialeah, serving Hialeah and nearby areas.












