







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Glenvar Heights, FL: What the Job Actually Involves
Cabinets & countertops in Glenvar Heights typically run $14,000 to $45,000 for a full tear-out and replacement, with cabinet installation alone landing between $4,000 and $13,000 and countertops between $2,000 and $6,500. Most jobs are finished in 3 to 5 weeks from demo to final caulk. Call (888) 418-7102 for a free on-site estimate with a written line-item quote.
How We Run a Cabinet and Countertop Replacement, Start to Finish

Cabinet and countertop work has a fixed order. Skip a step and you’ll pay for it later when a door won’t sit flush or the slab cracks on install. Here’s the sequence we use on Glenvar Heights jobs.
Day 1: Demo, protection, and surprise inspection
We pull the old cabinets and countertop, protect the flooring, and shut off the water and power to the kitchen zone. This is when we find out what’s behind the drywall: water damage under the sink, a warped subfloor, or wiring that was never brought up to code. You get photos and a written change order before we touch anything. Budget one day for a standard kitchen, two if we’re removing tile backsplash and mortar.
Days 2 – 3: Rough-in and wall prep
If you’re moving the sink, adding a dishwasher, or shifting the range, the plumber and electrician do their work here before cabinets go in. We also level the walls and patch the drywall, since old Glenvar Heights homes rarely have a straight corner. This is where you lock in your appliance specs so the cabinet boxes are sized right the first time.
Days 4 – 6: Cabinet installation
Boxes go in, then we shim, level, and fasten them to studs, not just to each other. Doors and drawers get adjusted after the boxes are set. You’ll decide on hardware placement at this stage, and we’ll mark it out with you. Upper cabinets and any wall cabinet over the range hood take the longest to get true.
Day 7: Template for the countertop
Once cabinets are set, we template the countertop. For quartz or granite, the fabricator measures in person so the slab cuts match your actual walls. That template usually takes a week to come back cut and polished, which is the single biggest timeline variable in the whole job. If you’re going with a laminate or butcher block, you can skip the wait.
Days 14 – 18: Countertop install, sink, and final punch
The slab lands, the sink goes in, and we hook up the faucet. Most jobs we do in Glenvar Heights use a Moen or Delta pull-down faucet and a Blanco undermount sink, and both need the countertop cut before install. Then it’s backsplash, caulk, and a final walkthrough where we go over every door, drawer, and seam with you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions happen in week one. Here’s what the real trade-offs look like.
- Stock vs. semi-custom cabinets. Stock boxes are cheaper and ship fast, but they come in fixed sizes, so you’ll fill gaps with filler strips. Semi-custom lets you size to the inch and pick door styles. KraftMaid is a solid mid-range choice we specify often for Glenvar Heights jobs where the home’s original layout is staying.
- Plywood vs. particleboard boxes. Plywood holds up better in South Florida humidity and takes screws repeatedly. Particleboard is cheaper and fine for rentals or light use, but it swells if it ever gets wet.
- Quartz vs. granite vs. laminate. Quartz is non-porous and needs no sealing, which matters in a humid climate. Granite is natural stone, needs sealing once a year, and costs more at the high end. Laminate is the budget option and has gotten much better looking, but it can’t take a hot pan and it’s thinner at the edge.
- Undermount vs. drop-in sink. Undermount looks cleaner and makes counter cleanup easier. It also requires the countertop fabricator to cut and polish the opening, which adds cost. Drop-in sinks are cheaper to install but collect grime at the rim.
- Full-height backsplash vs. 4-inch splash. Full-height tile runs more and takes longer, but it protects the wall behind the sink and range from steam and grease. A 4-inch splash is the low-cost default on most quotes.
What Cabinets & Countertops Cost in Glenvar Heights, FL

For a full kitchen cabinet and countertop replacement in Glenvar Heights, expect $14,000 to $45,000. Cabinet installation alone is $4,000 to $13,000 and countertop installation is $2,000 to $6,500.
Here’s what moves you toward the low or high end of that range:
- Kitchen size and cabinet count. A galley kitchen with 12 linear feet of cabinets lands near $14,000. A large L-shaped or U-shaped kitchen with an island pushes well past $30,000.
- Existing condition. Water damage, a warped subfloor, or old galvanized plumbing found during demo adds cost. In Glenvar Heights’ 1950s – 1970s concrete-block homes, we find one or more of these on most tear-outs.
- Plumbing and electrical changes. Keeping the sink and range where they are saves $1,500 to $4,000. Moving either one means new supply lines, drain rerouting, and often a permit.
- Material grade. Stock cabinets with laminate counters sit at the floor. Semi-custom with quartz and a full-height backsplash sits at the ceiling.
- Sink and faucet upgrades. A basic drop-in sink and a standard faucet add little. An undermount with a pull-down Moen or Delta faucet adds $400 to $1,200 depending on finish and features.
Your written estimate will list cabinet brand and door style, countertop material and edge profile, sink and faucet model, and whether plumbing or electrical work is included. It typically does not include appliance cost, drywall repair beyond patching, or new flooring, and we’ll tell you that up front so there are no surprises. Plumbing relocations and structural changes get priced as separate line items, not buried in the total. Our Kitchen Remodeling in Glenvar Heights page covers the wider project if you’re also redoing flooring, lighting, or walls.
See the difference
Before
After
Before
After
Before
AfterWhat Glenvar Heights Homes Do to This Job
Glenvar Heights is a small, largely built-out unincorporated pocket of Kendall, hemmed by US-1 and the Palmetto Expressway. Almost every job here is renovation, addition, or rebuild, not new construction. That matters for cabinets and countertops because the homes we’re working in were built mostly between the 1950s and 1970s, as concrete-block ranches on generous lots. The original kitchens were small, the walls are rarely square, and the plumbing and electrical have often been patched by three different owners.
Permitting runs through unincorporated Miami-Dade, not a city hall, and the county’s post-Andrew High-Velocity Hurricane Zone rules apply to certain structural work even on interior jobs. If your cabinet replacement involves relocating a load-bearing wall, adding a pass-through, or opening up the kitchen to the living room, that’s a structural change and it needs a permit, product approvals, and an inspection. A like-for-like cabinet swap usually does not. In the 33143 ZIP, we also see a lot of “remodel plus addition” projects where owners are tacking on a second story or in-law suite to a 1960s ranch. That work can uncover undersized footings and rusted rebar in the original slab, which we’d need to flag before we set cabinets over it.
Humidity is the other local factor. South Florida’s May through November wet season is brutal on cabinet boxes and wood doors, so we always specify moisture-resistant materials and we don’t leave cabinet boxes sitting in a garage for two weeks during storm season. If your project is part of a larger build-out, homeowners often pair this with a Garage Conversion ADU in Glenvar Heights or a New Detached ADU in Glenvar Heights, and we coordinate the timelines so the cabinet install doesn’t land in the middle of another crew’s framing.
Serving Glenvar Heights, FL – Our Local Coverage Area
We serve Glenvar Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Glenvar Heights

Plan on 3 to 5 weeks for a full replacement, with cabinets installed by day 6 and countertops landing about a week after template. The single biggest delay is the countertop fabrication window, so picking your slab early keeps the schedule tight.
A straight like-for-like swap generally does not require a permit, but moving plumbing, electrical, or a load-bearing wall does. Glenvar Heights sits in unincorporated Miami-Dade, so those permits run through the county, not a city building department. We pull the permit when one is needed and schedule the inspection; you don’t have to chase it down.
Yes, and it’s the most common version of this job. Keeping the sink and range in place means no drain rerouting, no new supply lines, and no permit. You save $1,500 to $4,000 and cut about a week off the schedule.
Full replacement runs $14,000 to $45,000, with cabinets at $4,000 to $13,000 and countertops at $2,000 to $6,500 depending on material and size. Call (888) 418-7102 for an exact quote; estimates are free.
Every project we do is covered by our 730-Day Done Right Promise. If a cabinet door won’t close right or a countertop seam fails inside that window, we come back and fix it, and that’s in writing before the job starts.
Get a Free Cabinets & Countertops Estimate in Glenvar Heights
If you’re planning a cabinet and countertop replacement in Glenvar Heights, the first step is a free on-site estimate. We measure the kitchen, check the walls and plumbing, and give you a written line-item quote with material options and a firm timeline. Call (888) 418-7102 and a live person will pick up, any hour. From there, our Kitchen Remodeling team handles the design consult, and we cover the full Glenvar Heights area.
Written by the team at Groundwork Construction Co.












