







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Glenvar Heights, FL: What the Job Actually Involves
Paver driveways in Glenvar Heights, FL typically run $7,000 to $18,000 for a standard residential project, with most installations finished in 3 to 5 working days once the base is prepped. That range covers demolition of the old surface, a compacted limerock or crushed-stone base, edge restraints, and the setting of concrete or clay pavers on a 33143-area lot. Call (888) 418-7102 and we’ll walk your property, measure the drive, and put a written line-item number in your hands.
One thing to know up front: on the larger, hedge-lined lots common off Kendall Drive and around the US-1 corridor, we’re usually building a drive wide enough for two cars plus a turnaround, and that pushes most jobs to the middle of that range, not the bottom.
How We Build Paver Driveways in Glenvar Heights, Stage by Stage

Driveway work is mostly base work. The pavers get all the attention, but what happens in the first two days under the surface decides whether you’re re-doing this job in ten years. Here’s the real sequence.
Stage 1: Site visit and written scope (day 1)
We walk the property, measure the footprint, check the slope for drainage, and note what’s in the way: irrigation lines, a low hose bib, gate posts, a mailbox footing. You decide the paver style and the layout, and we hand you a written line-item quote with the price locked. Nothing gets ordered until you sign off.
Stage 2: Demo and haul-off (day 1 to 2)
The existing surface comes out. A lot of the 1950s-to-1970s concrete drives in this pocket are thinner than they look, and old concrete or asphalt gets broken, loaded, and hauled off. Expect a real dumpster or two on a two-car drive. This is also where we discover the surprises: root intrusion, a soft spot from a leaking line, or a buried slab from an earlier pour.
Stage 3: Excavation, grading, and base (day 2 to 3)
We cut down to depth, grade the base away from the garage, and lay a compacted base in lifts with a plate compactor. On a drainage-sensitive lot, we’ll add a small drain or channel to move water off the drive instead of into the garage threshold. This is the stage you don’t see and shouldn’t rush.
Stage 4: Setting pavers, edges, and cuts (day 3 to 4)
Edge restraint gets installed first so the field doesn’t spread. Then the pavers go down, and every cut along the garage apron, walkway, and property line gets made clean with a wet saw. You’ll want to be present for the final layout check on tight geometries.
Stage 5: Compaction, joint sand, and cleanup (day 4 to 5)
We run a plate compactor over the finished field, sweep in polymeric or regular joint sand, and clean up. Most Glenvar Heights drives are drive-ready the same evening. Hold off on heavy vehicles for a few days if we used polymeric sand, and plan to re-sweep sand after the first wet season.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
This is where the look and the wear profile get decided. The honest trade-offs:
- Concrete pavers (Belgard, standard and premium lines) – the workhorse choice. Interlocking, so a cracked paver can be lifted and swapped without tearing up the drive. Expect $6 to $10 per square foot installed depending on the line.
- Clay brick pavers – harder, richer color, and they hold up to sun and hurricane-season rain better than most concrete. They cost more and the color range is narrower. Suits the older ranch character of the neighborhood.
- Permeable pavers with an open-graded base – lets stormwater drain through instead of sheeting to the street. Worth talking through on a low lot. Adds roughly 15 to 25 percent to base and material cost.
- Paver plus border pattern – a contrasting soldier course or accent border sharpens the curb line and adds a material cost of a few hundred dollars on a typical drive.
- Sealer or no sealer – sealing deepens color and helps with weed growth in the joints. It’s maintenance, not a fix, and it goes on after the drive cures.
We carry Belgard and other top-tier paving lines, so the choice is about what fits your lot, not what’s in stock. If the paver drive is part of a bigger push, homeowners often pair it with the wider Driveway & Pavers in Glenvar Heights scope or with front-entry upgrades.
What Paver Driveways Cost in Glenvar Heights, FL

Plan on $7,000 to $18,000 for a full paver driveway installation, and $250 to $700 for a later sealing. Here’s how a job lands at the low versus the high end:
- Size and shape. A simple single-car-to-double drive sits near the bottom. A wrapping apron, widened approach, or curved layout adds square footage and cuts.
- Condition of what we’re replacing. Thick old concrete or a buried secondary slab means more demo, hauling, and disposal cost. Soft subgrade from a leaking line means deeper excavation.
- Paver grade and brand line. Standard concrete pavers up to premium lines or clay brick is the largest swing in material cost.
- Base and drainage. A site that needs a channel drain, grading, or a permeable system adds cost and prep time.
- Access. A tight gate or a lot with a mature hedge line slows haul-in of base material and slows the crew.
Your written quote itemizes demo, base, pavers, edge restraint, sand, and haul-off so you can see what’s included. Permitting and any HOA approval run separately. The number you see is the number you pay, and the whole job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Glenvar Heights Homes Specifically Do to Paver Driveways
This is a built-out, unincorporated pocket of Kendall hemmed between US-1 and the Palmetto Expressway, and that shapes the work. Almost nothing here is a fresh subdivision; it’s renovation, addition, or rebuild. Because the county runs the permit desk, every paver job gets reviewed under Miami-Dade’s post-Andrew High-Velocity Hurricane Zone code. In practice: edge restraints, base compaction, and tie-in to existing garage aprons get scrutinized, and if the drive ties into a new structure or a remodel, we’re pulling permits through unincorporated Miami-Dade rather than a city hall. The 33143 stock – 1950s-to-1970s concrete-block ranches on generous lots – means deep set-backs and long drives, plus the “remodel plus addition” pattern where a second story or in-law suite triggers structural upgrades. We’ve opened up plenty of these drives and found undersized footings and rusted rebar under the old slab, which changes the base plan. Storm season is real May through November, so we schedule pours and pavers around the afternoon thunderstorms and get water moving before it reaches the garage. If your project grows past the drive, we also handle Cabinets & Countertops in Glenvar Heights for the interior side, and our Door Installation in Glenvar Heights for entry and garage doors.
We’re set up to serve the wider Glenvar Heights area and neighboring communities including Coral Terrace, Sunset, Olympia Heights, and Westchester. For a broader look at our approach, see the Driveway & Pavers service.
Serving Glenvar Heights, FL – Our Local Coverage Area
We serve Glenvar Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Glenvar Heights

Most paver driveways here are finished in 3 to 5 working days once we start. Demo, base, pavers, and cleanup are the stages; rain days during the May-November wet season can add a day or two. Call (888) 418-7102 and we’ll give you a realistic schedule for your lot.
Since this is unincorporated Miami-Dade, permit requirements fall under the county, and whether you need one depends on scope, drainage tie-ins, and whether the drive connects to a structural change. We walk through permitting at the estimate stage. Call (888) 418-7102 to talk it through for your address.
Sometimes, but only when the existing slab is sound, properly sloped, and thick enough – which is not the norm on the older ranches here. Most jobs need demo down to the base so we can grade and compact correctly. We’ll tell you honestly which case you’re in at the site visit. Call (888) 418-7102 for a free assessment.
Expect $7,000 to $18,000 for a full installation, depending on size, paver grade, base condition, and drainage. Sealing later runs $250 to $700. Call (888) 418-7102 for an exact quote – the estimate is free and written line by line.
Our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer warranties on the pavers themselves vary by line. Call (888) 418-7102 and we’ll spell out exactly what’s covered.
Get a Free On-Site Paver Driveway Estimate
Call (888) 418-7102 to schedule a free on-site estimate for paver driveways in Glenvar Heights. A live person answers, day or night, and we’ll set a time that works. At the visit we measure the drive, check the base and drainage, and leave you with a written, line-item price and a start date – no pressure, no vague number. Background-checked, uniformed technicians handle every job.
Written by the team at Groundwork Construction Co.












