







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Concrete Driveways & Concrete Work in Doral, FL actually involves
Concrete driveway installation in Doral runs $4,500 – $12,000 for most residential lots, and a full tear-out-and-pour usually takes 3 to 6 working days from demo to the first day you park on it. Concrete work here is mostly driveways, aprons, approaches, pads and slabs, and the schedule is driven far more by site prep and Miami-Dade County inspection than by the pour itself. Call (888) 418-7102 to schedule a free on-site estimate.
The process, stage by stage

Concrete isn’t a finish job you can shortcut. The pour is the shortest part of the week. Here’s the real sequence we run on a Doral driveway, and what you decide at each point.
Stage 1: Site walk and layout (day 1, about an hour)
We measure the existing slab or the bare lot, check the slope away from the garage, and look for the underground stuff that makes Doral jobs tricky: irrigation lines, drainage swales, and the high water table that shows up as soon as anyone digs. At this stage you decide the driveway width, whether you want a widened apron for a second vehicle, and whether expansion joints will be visible or saw-cut later. If your property is in a gated community, bring the HOA architectural approval copy before we set a start date.
Stage 2: Demo and haul-off (days 1 – 2)
Old concrete comes out with a breaker and a mini-excavator, and it leaves the same day on a dump truck. On Doral lots where the driveway pinches between the house and a shared fence or sits on an alley approach, this is where access matters most – we plan truck staging around street parking and any neighbor driveways before we break ground, not after. Expect noise and a blocked driveway for those two days.
Stage 3: Subgrade, base and formwork (days 2 – 3)
This is where a driveway either lasts twenty years or cracks in three. We excavate to depth, compact the subgrade, and bring in a compacted base that lets water move instead of sitting against the slab. Forms go up and the slope is set. In Doral, drainage is the whole game: the flat terrain and high water table mean a poorly graded slab becomes a pond, so we pitch every driveway toward the street or a drain. You decide at this stage whether you want a thickened edge for heavier vehicles.
Stage 4: Reinforcement, inspection and pour (day 3 or 4)
Rebar or mesh goes in, we call for the county inspection, and once it passes the ready-mix truck arrives. Most driveways pour in one continuous run so there are no cold joints. Finish is chosen here: broom finish for grip, or a light salt finish if you want texture without the slippage of a polished surface.
Stage 5: Cure and cut (days 4 – 6, then the wait)
Control joints get saw-cut within the first day or two while the concrete is still green, and then it cures under a curing compound. You can walk on it in about 24 hours and drive on it around day 7 – later if the weather is hot and humid, which in Doral it usually is. Full cure takes about 28 days; that’s when it hits design strength.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
A driveway is one of the few exterior purchases where the choice board is short but the consequences run twenty years. Here’s what actually comes up on a Doral job:
- Plain broom-finished concrete – the workhorse. Lowest cost per square foot, best traction when wet, and the easiest to repair in a decade if something goes wrong. It shows every stain and every hairline crack, so it suits homeowners who want function over looks.
- Exposed aggregate – a richer surface where the top layer of cement is washed away to show the stone. Better grip than smooth concrete and it hides dirt, but it costs more and it’s harder to patch invisibly later.
- Colored or integral pigment – the dye goes into the mix rather than on top, so it doesn’t wear off. The trade-off is that color matching a future repair is never perfect.
- Standard 4-inch slab vs. thickened sections – 4 inches is fine for a car; if a truck, boat trailer or heavy SUV parks regularly, thickened edges and heavier rebar cost more but prevent the crumbled edge that’s common on older Doral driveways.
- Fiber mesh vs. rebar – fiber controls shrink cracking and is cheaper; rebar adds structural strength for wider slabs and heavier loads. We recommend rebar for anything wider than a single-car approach.
If your project is part of a full Driveway & Pavers in Doral plan that includes walkways or a side patio, we scope it all at once so the grading and drainage are designed together rather than piecemeal.
What Concrete Driveways & Concrete Work costs in Doral, FL

Expect $4,500 – $12,000 for a concrete driveway installation in Doral, and $5,000 – $14,000 if it’s a full replacement that includes tearing out an old slab. A single concrete pad, apron or approach sits well below that range; a long double-width driveway with thickened edges and a decorative finish pushes toward the high end. Here’s what moves the number:
- Square footage and width. A tight single-car approach and a 20-foot-wide double driveway are different budgets before you even pick a finish.
- Demo and haul-off. Removing existing concrete adds cost and time; a bare-lot pour skips that stage.
- Site prep and drainage. Doral’s flat terrain and high water table mean grading and base work can take longer than framing would on a new build. Poor drainage needs correcting before a pour, not after.
- Finish and reinforcement. Broom finish is the base line; exposed aggregate, integral color, thickened sections and rebar each add.
- Permit scope. A new or replaced driveway requires a county permit and inspection; the permit cost and the inspection scheduling are part of the written estimate.
Every quote we hand you is line-item and upfront: the number you see is the number you pay, with no change orders sneaking in mid-project. Our driveway & pavers service (Driveway & Pavers) covers what we do across all these surfaces. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available to spread the cost.
See the difference
Before
After
Before
After
Before
AfterWhat Doral homes specifically do to this job
Doral is a boomtown that’s still building, not a settled suburb, and that shapes concrete work here. Most of the housing stock is 1990s – 2010s Mediterranean-style stucco-over-CMU homes in gated communities like Doral Isles and Islands at Doral, plus newer townhomes and mid-rises near Downtown Doral. Because those homes were built within the last 25 – 30 years, we’re often pouring either first-time driveways on infill lots or replacing original slabs that have taken a decade or two of summer rain. Under Miami-Dade’s high-velocity hurricane zone code, every permitted structure – including site work tied to a structure – clears a county inspection, so we schedule the rebar inspection before the pour and don’t skip it. And with the industrial boom along NW 25th Street and Doral Boulevard, a lot of concrete work here is commercial pads and approaches, not just home driveways. The failure pattern we see most on residential slabs in Doral: a driveway that was pitched too flat and now holds water at the garage threshold after every August storm. That’s a grading problem, and it’s fixed at prep, not with a patch.
Serving Doral, FL – Our Local Coverage Area
We serve Doral and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Doral

Most residential concrete driveways in Doral take 3 to 6 working days from demo to the first day it’s ready to walk on, and about 7 days before you drive on it. Weather is the wild card – a summer afternoon storm will push the pour to the next morning, and we don’t pour over a wet subgrade. Call (888) 418-7102 for a schedule estimate on your lot.
Yes – a new or replaced driveway requires a Miami-Dade County permit and an inspection before the pour, and we pull it for you. The inspection covers site prep, base and reinforcement, so we can’t pour until it clears. The permit cost and inspection scheduling are built into the written estimate. Call (888) 418-7102 to talk through your project.
In most cases, yes – a driveway pour doesn’t touch plumbing or the house structure. It only becomes complicated if a drain line, sewer cleanout or gas line runs under the driveway footprint, which happens on some older Doral lots. We locate those before demo. If utilities are in the way, we factor the relocation into the estimate rather than discovering it mid-pour.
Concrete driveway installation in Doral is $4,500 – $12,000, and a full replacement runs $5,000 – $14,000 including tear-out. Decorative finishes, extra width and thickened edges push toward the top of that range; a bare-lot pour sits toward the bottom. Call (888) 418-7102 for an exact quote – estimates are free.
Every concrete driveway we pour is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years after completion. That sits well beyond the industry norm, which is often a handshake and a promise. Call (888) 418-7102 to schedule your free on-site estimate.
Ready for a real number on your Doral driveway?
A free on-site estimate is the fastest way to know what your concrete driveway actually costs. We walk the lot, check the grading and drainage, and hand you a line-item written quote with the permit and inspection built in – upfront pricing, no surprises. Many Doral homeowners pair a new driveway with ADU Site Prep & Utilities in Doral or a fresh entry with Door Installation in Doral. Call (888) 418-7102 – a live person answers 24/7 – and we’ll find a time that works. We cover Doral and the surrounding neighborhoods.
Written by the team at Groundwork Construction Co.












